Servicing

FROM ONLY £125 

4.5* reviews on Google!

Why choose Green Lane Autos?

While an MOT will make sure your car is roadworthy, servicing it will make sure the car will last. There are a lot of things that can happen to a car within a year and if not taken care of they will lead to costly repairs and maybe a replacement of the whole vehicle.

Many of the problems cars face go undiagnosed until it is too late. This is why a service is so important. We check the electrics, the spark plugs and the oil levels, among other areas, to make sure there isn’t a problem or it is caught quickly and repaired or replaced.

With Green Lane Autos, we promise to do a full service and make sure your vehicle is in the best working order.

From only £125

Book Now

    Don’t just take it from us. Here’s what our customers have to say!

    What you can expect at your next service with Green Lane Autos

    INTERIM
    FULLMAJOR
    When should it be done?6 Months 6,000 Miles12 Months 12,000 Miles24 Months 12,000 Miles
    Points checked507777

    INTERIMFULLMAJOR
    Check for body damage
    Check for wheels and trims for damage
    Check operation of brakes for judder and noise
    Check steering controls and column

    INTERIMFULLMAJOR
    Check and record antifreeze strength and min temp
    Check condition and adjust auxiliary drive belts if required (excluding cambelt)
    Check condition and security of undertray
    Check condition and tension of fan and alternator belt. Adjust or report on condition
    Check coolant hoses for leaks, condition, and security
    Check coolant/radiator cap seals
    Check electric cooling fan for operation where applicable
    Check for excessive oil leaks
    Check for timing belt (cambelt) replacement interval and report if replacement due according to mileage or age
    Check radiator condition, security and report any leaks
    Drain engine oil and refill with correct type
    Replace air filter and clean out housing
    Replace oil filter
    Replace sump plug seal or report sump plug replacement if integral
    Report if spark plugs need changing according to mileage
    Top up coolant as required

    INTERIMFULLMAJOR
    Check fuel cap seal condition
    Check fuel filter replacement interval and report if due
    Check the visual condition of fuel lines

    INTERIMFULLMAJOR
    Carry out brake fluid boil test and record readings
    Check and top up clutch fluid (if applicable)
    Check and top up gearbox fluid where applicable and not sealed
    Check and top up transfer box and differential oils
    Check brake calipers for leaks and security
    Check brake discs and drums for wear, cracks, corrosion and scoring or pitting
    Check brake fluid level and top up if required
    Check brake pads for wear or damage
    Check brake servo operation
    Check drive shaft gaiters for security and report leaks
    Check foot brake shoes for wear or damage – clean and adjust if required (where applicable)
    Check for correct clutch operation
    Check for correct gearbox operation
    Check security of handbrake linkages and travel. Lubricate and adjust if required
    Check security of handbrake linkages and travel. Lubricate and adjust if required
    Grease prop/shaft (if applicable)
    Inspect operation of wheel cylinders and report any leaks
    Replace brake fluid and bleed system
    Visually check brake hydraulic system, pipes and hoses for any leaks, chafing and corrosion

    INTERIMFULLMAJOR
    Carry out shock absorber (bounce test) and report any serious leaks
    Check battery, security and condition and print results
    Check diesel heater plug indicator operation where fitted
    Check horn
    Check operation of exterior lights
    Check steering and suspension components for wear and corrosion
    Check steering and suspension components for wear and corrosion
    Check steering rack gaiters condition
    Check steering rack gaiters condition
    Check wheel bearings for excessive play or noise
    Check wheel bearings for excessive play or noise
    Check/top up power steering reservoir (where applicable)
    Grease steering and suspension
    Inspect exhaust system (inc catalyst if fitted) for leaks, security and noise
    Lubricate battery terminals
    Test alternator charging rate – check security
    Top up battery (non-sealed units only)
    Visual check for exhaust smoke
    Visual inspection of HT (high tension) leads
    Visually check power steering system, pipes and hoses for leaks, chafing and corrosion
    Visually check power steering system, pipes and hoses for leaks, chafing and corrosion

    INTERIMFULLMAJOR
    Check and adjust tyre pressures (including spare) If no spare, record sealant canister expiry date
    Check tyre condition and tread depth (including spare)
    Check tyre size and tyre fitted
    Check wheels for correct balance (including spare if applicable)
    Remove road wheels and check condition of hub faces
    Set wheel nut torque to manufacturers settings

    INTERIMFULLMAJOR
    Advise if cabin filter is required according to age/mileage recommendations and last change
    Check dash warning lights
    Check mirror condition – interior and exterior
    Check number plate condition
    Check operation of all external door locks
    Check rear wiper condition/operation (if fitted)
    Check screen washer operation, align jets if required
    Check seatbelts – front and rear including lap belt
    Check windscreen for chips and cracks
    Check windscreen wiper condition and operation
    Lubricate accessible door hinges (widiv white grease)
    Lubricate bonnet catch
    Replace cabin filter and clean out housing
    Reset vehicle service light where applicable (subject to data and tooling availability)
    Stamp service book
    Top up screen washer bottles

    INTERIMFULLMAJOR
    Check condition of charging port and charging cable
    Check windscreen wiper condition and operation
    Connect diagnostic for hybrid health check (report live data)
    Report if inverter coolant is due
    Rotate road wheels to check for brake binding
    Visually check high voltage cables and connections for damage